请老师帮忙改成主力启动=66预警

一与 · 发表于 2015-9-12 16:31

STICKLINE(1,0,0,1,0),POINTDOT,LINETHICK3,COLOR0000FF;
QQ:=(((((MA(CLOSE,1) + MA(CLOSE,3)) + MA(CLOSE,5)) + MA(CLOSE,7)) + MA(CLOSE,9)) / 5);
WW:=(((((MA(CLOSE,2) + MA(CLOSE,4)) + MA(CLOSE,6)) + MA(CLOSE,8)) + MA(CLOSE,10)) / 5);
A:=EMA(QQ,3);
B:=EMA(WW,10);
VAR1:=EMA(AMOUNT,1)/EMA(VOL,1)/100;
AA:=DMA(A,VAR1);
BB:=DMA(B,VAR1);
VAR29:=MAX((2 * (AA - BB)),0) * 100;
NHSH_:EMA(VAR29,3),COLORFFFFFF;
CB:=WINNER(CLOSE)*100;
CC:=EMA(CB,2);
追涨热度:MAX((EMA(CC,2) - EMA(CC,5)),0),LINETHICK0,COLOR00FFFF;
STICKLINE(1,0,0,1,0),POINTDOT,LINETHICK3;
STICKLINE(1,0,0,1,0),POINTDOT,LINETHICK3;
敢死隊:IF((((VAR29 > 0) AND (VAR29 > REF(VAR29,1)))),(BARSLAST(CROSS(VAR29,0.01)) + 1),0),LINETHICK0;
主力拉升:IF((((VAR29 > 0) AND (VAR29 > REF(VAR29,1)))),66,0),LINETHICK0,COLORFF00FF;
主力启动:IF((CROSS(VAR29,0.01)),66,0),LINETHICK0,COLORFF00FF;
STICKLINE(((VAR29 > 0) AND (VAR29 > REF(VAR29,1))),REF((NHSH_ * 1.035),1),(NHSH_ * 1.035),6,1),COLORFF00FF;
HHHD:=IF(CROSS(VAR29,0.01),CLOSE,REF(CLOSE,BARSLAST(CROSS(VAR29,0.01))));
HHH:=IF(CROSS(VAR29,0.01),(LOW * 0.995),REF((LOW * 0.995),BARSLAST(CROSS(VAR29,0.01))));
成本:IF((((VAR29 > 0) AND (VAR29 > REF(VAR29,1)))),HHHD,0),LINETHICK0;
止赢:IF((((VAR29 > 0) AND (VAR29 > REF(VAR29,1)))),(HHHD * 1.06),0),LINETHICK0,COLOR0000FF;
止赢１:=IF((((VAR29 > 0) AND (VAR29 > REF(VAR29,1)))),(HHHD * 1.1),0);
止损:IF((((VAR29 > 0) AND (VAR29 > REF(VAR29,1))) ),HHH,0),LINETHICK0,COLORFFFF00;
离場:IF(((主力拉升 = 0) ),(BARSLAST(CROSS(主力拉升,0.01)) + 1),0),LINETHICK0,COLOR00FFFF;
KZ:="KDJ.K"(9,3,3);
DZ:="KDJ.D"(9,3,3);
K:="KDJ.K"(9,3,3);
KA:="KDJ.D"(9,3,3);
DA:="KDJ.K"(9,3,3);
NN:="KDJ.D"(9,3,3);
NNN:=(BARSLAST((CROSS(KZ,DZ) AND (KZ < 50))) < 13);
NNNN:=(BARSLAST((CROSS(K,KA) AND (K < 20))) < 13);
AAK:=(BARSLAST((CROSS(DA,NN) AND (DA < 20))) < 13);
BBK:=IF((((MA(VOL,5) / 240) >= 5) AND ((CLOSE > (REF(CLOSE,1) * 0.98)) = 1)),88,0);
VAR1MM:=IF(((((((CLOSE / REF(CLOSE,1)) >= 1) AND (((VOL / CAPITAL) * 100) <= 30)) AND (((VOL / CAPITAL) * 100) >= 1.5)) AND ((HIGH / CLOSE) <= 1.001)) AND (BBK >= 1)),93,0);
IF((((((VAR1MM > 90) AND NNN) AND NNNN) AND AAK) ),20,0);
IF(((((VAR1MM > 90) AND NNN) AND NNNN) ),20,0);
VAR2MM:=EMA(MA(IF((CLOSE > OPEN),((CLOSE - OPEN) * VOL),IF((CLOSE < OPEN),((CLOSE - OPEN) * VOL),0)),5),1);
VAR3MM:=EMA(MA(IF((CLOSE > REF(CLOSE,1)),((CLOSE - REF(CLOSE,1)) * VOL),IF((CLOSE < REF(CLOSE,1)),((CLOSE - REF(CLOSE,1)) * VOL),0)),5),1);
VAR4MM:=EMA(MA(IF((OPEN > REF(CLOSE,1)),((OPEN - REF(CLOSE,1)) * VOL),IF((OPEN < REF(CLOSE,1)),((OPEN - REF(CLOSE,1)) * VOL),0)),5),1);
VAR5MM:=EMA(MA(IF((CLOSE < OPEN),((OPEN - CLOSE) * VOL),IF((CLOSE > OPEN),((OPEN - CLOSE) * VOL),0)),10),1);
VAR6MM:=EMA(MA(IF((CLOSE < REF(CLOSE,1)),((REF(CLOSE,1) - CLOSE) * VOL),IF((CLOSE > REF(CLOSE,1)),((REF(CLOSE,1) - CLOSE) * VOL),0)),10),1);
VAR7MM:=EMA(MA(IF((OPEN < REF(CLOSE,1)),((REF(CLOSE,1) - OPEN) * VOL),IF((OPEN > REF(CLOSE,1)),((REF(CLOSE,1) - OPEN) * VOL),0)),10),1);
VAR8MM:=(CLOSE > OPEN);
VAR9MM:=(CLOSE > REF(CLOSE,1));
VARAMM:=(OPEN > REF(CLOSE,1));
VARBMM:=((VAR8MM OR VAR9MM) OR VARAMM);
VARCMM:=((((VAR2MM + VAR3MM) + VAR4MM) / 3) / 100);
VARDMM:=((((VAR5MM + VAR6MM) + VAR7MM) / 3) / 100);
VAR25MM:=EMA((((((((COUNT(VAR9MM,12) / 12) + (COUNT(VAR8MM,12) / 12)) + (COUNT(VARAMM,12) / 12)) / 3) * MA(VARCMM,5)) * 2) * 1.1),2);
换手:=(((VARDMM < 0) AND (VARCMM > VAR25MM)) AND (((CLOSE + OPEN) / 2) > MA(CLOSE,5)));
NMB:=((VOL / CAPITAL) * 100);
IF((((((CROSS(换手,0.1) AND ((VARCMM / 50) >= 0.1)) AND (NMB >= 3)) AND NNN) AND NNNN)),20,0);

秋虎 · 发表于 2015-9-12 21:19

试了下还可以：
VAR1:=CLOSE>REF(CLOSE,1) AND CLOSE>REF(CLOSE,2);
VAR2:=REF(VAR1,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
VAR3:=REF(VAR2,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
VAR4:=REF(VAR3,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
VAR5:=REF(VAR4,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
VAR6:=REF(VAR5,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
VAR7:=REF(VAR6,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
VAR8:=REF(VAR7,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
VAR9:=REF(VAR8,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
VARA:=REF(VAR9,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
VARB:=REF(VARA,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
VARC:=REF(VARB,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
VARD:=CLOSE<REF(CLOSE,1) AND CLOSE<REF(CLOSE,2);
VARE:=REF(VARD,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
VARF:=REF(VARE,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
VAR10:=REF(VARF,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
VAR11:=REF(VAR10,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
VAR12:=REF(VAR11,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
VAR13:=REF(VAR12,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
VAR14:=REF(VAR13,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
VAR15:=REF(VAR14,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
VAR16:=REF(VAR15,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
VAR17:=REF(VAR16,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
VAR18:=REF(VAR17,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
VAR19:=REF(VARD OR VARE OR VARF OR VAR10 OR VAR11 OR VAR12 OR VAR13 OR
VAR14 OR VAR15 OR VAR16 OR VAR17 OR VAR18,1) AND VAR1;
Q2:=(CLOSE-LLV(LOW, 18))/(HHV(HIGH, 18)-LLV(LOW, 18))*100;
Q3:=SMA(Q2, 9, 1);
Q4:=SMA(Q3, 3, 1);
AA:=3*Q3-2*Q4;
A1:=EMA(Q3, 3);
A2:=EMA(A1, 3);
A3:=EMA(A2, 3);
A4:=EMA(A3, 3);
A5:=EMA(A4, 3);
A6:=EMA(A5, 3);
VAR19 AND CROSS(AA,A1) AND CROSS(A1,A2) AND AA>A6;

新人报道 · 发表于 2015-9-13 19:10

QQ:=(((((MA(CLOSE,1) + MA(CLOSE,3)) + MA(CLOSE,5)) + MA(CLOSE,7)) + MA(CLOSE,9)) / 5);
WW:=(((((MA(CLOSE,2) + MA(CLOSE,4)) + MA(CLOSE,6)) + MA(CLOSE,8)) + MA(CLOSE,10)) / 5);
A:=EMA(QQ,3);
B:=EMA(WW,10);
VAR1:=EMA(AMOUNT,1)/EMA(VOL,1)/100;
AA:=DMA(A,VAR1);
BB:=DMA(B,VAR1);
VAR29:=MAX((2 * (AA - BB)),0) * 100;

主力启动:=IF((CROSS(VAR29,0.01)),66,0);
主力启动=66.00;